Black Pearl™ SiO2 Ceramic Coating Kit

Description:

Car Brite Black Pearl Ceramic Si02 Coating provides a lasting, impermeable barrier that protects surfaces against the harshest of elements while providing a deep, rich gloss. The Si02 formula is a liquid glass coating resistant to scratches, acid, salt, chloride and alkaline making it far more durable than wax. The coating provides a near perfect surface creating a self-cleaning finish that helps prevent water spots and the adhesion of deposits while enhancing color and depth of shine. Plus, its anti-static properties help repel dust helping keep surfaces cleaner - longer.

Characteristics

Function:

Impermeable coating for painted and glass surfaces

Surfaces:

Paint, Glass & Chrome

Formulation:

Silicon Dioxide

Color:

Clear

Fragrance:

Unscented

Key Benefits

Liquid glass 9H protection
10x harder than today's painted finishes
Lasts up to 5 years
Helps keep your vehicle cleaner - longer
Anti-static formula helps repel dust
Helps prevent scratches
Fills small scratches and swirl marks

How to use

DIRECTIONS FOR USE:

Do not apply in direct sunlight. Application should be done in a well-lit area.
Car Brite recommends using multiple colored microfiber towels for this process to avoid risk of contamination or damage.
1. Your choice of color for compound & polish
2. We recommend white for the removal of silicone prior to the application as it will reveal any areas needing cleaning attention
3. A dedicated color for buffing the ceramic. This cloth must be disposed of after application is complete as tiny glass particles could cause scratching.
The first step with any ceramic coating is to prepare the surface by removing any scratches and surface contaminants.
1. After washing the vehicle, inspect for scratches and surface contaminants. Surface contaminants can be felt by gently wiping a piece of plastic film over the surface.
  1. Remove scratches with Car Brite SELECT Painted Surface Care or Trilogy compounds and polishes.
  2. Remove surface contaminants with a Car Brite Surface Prep Mitt or clay bar.
Next, remove any wax, silicone or grease using isopropyl alcohol over entire surface to be coated.
Apply a small amount to the applicator block and apply to vehicle surface using a cross-hatch pattern to ensure adequate coverage. Make your initial application to a 2’ x 2’ area to understand dry time that typically takes 1-3 minutes. It’s important to keep the work area manageable and not allowing the product to completely dry on the surface.
When product begins to haze and feels tacky, wipe with black cloth. This helps to spread product evenly while removing excess.
Immediately buff area with a clean microfiber towel to a lustrous sine.
Then, continue this process until entire vehicle has been coated.

Specifications

Solvent Based: Yes

Ready-to-Use: Yes

Car Brite Xpress-It Quick Detailer 64 Oz